Tektronix - 1121 - Amplifier
Manufacturer:
Image 1 of 1
If you have any other photos or manuals for the
Tektronix 1121
you can
upload the files here.
Equipment:
1121
Date:
1960
Category:
Group:
Sub Group:
Information
The Tektronix Type 1121 Amplifier is a self-contained two
stage amplifier designed primarily to increase the
sensitivity of the equipment with which it is used. Overall
gain of 'the unit is 100. Thus, with maximum input of ±10
mv, the output is ±1 v. A cascode-type step attenuator
permits attenuation of the input signal from IX to 500X in
nine calibrated steps. This allows a signal of up to ±5
volts at the input connector without overloading the
amplifier. Connection between the Type 1121 and the
equipment it is to drive is via a matched 93-ohm coaxial
cable, so that the separation of the instruments may be 100
feet or more. As in all Tektronix instruments, primary
emphasis has been placed on the achievement of optimum
transient response. The pass band of the Type 1121 is in
excess of 17 megacycles.
Its compactness and versatility make the Type 1121 well
adapted for use with any oscilloscopes or other equipment
employing wide-band amplification.
1 Manual
Service and user manual
Manual type:
Service and user manual
Pages:
33
Size:
15.1 MB
Language:
english
Revision:
Manual-ID:
070-204
Date:
January 1960
Quality:
Scanned document, all readable.
Upload date:
Dec. 28, 2017
MD5:
9578a12f-17b5-8cf3-1755-5336d32912ac
Downloads:
534