Tektronix - AWG420 - Generator
Manufacturer:
Equipment:
AWG420
Date:
Category:
Group:
Sub Group:
Information
The AWG400-Series Arbitrary Waveform
Generator is a programmable Arbitrary Waveform
Generator which has a maximum 200 MS/s, 4 M word per channel waveform memory and 16-bits DAC. Amplitude is programmable up to 2.0 V (Complementary output) or {5 V (Single-Ended output) optional} peak-to-peak into 50 W with independent offset control.
The exterior of the AWG400-Series Arbitrary Waveform
Generator is similar to
the AWG500/AWG600-series product, except that the parameters and operating menus are displayed on an LCD color monitor instead of a monotone CRT (cathode ray tube).
The instrument can be manually controlled from the front panel and remotely
programmed via a GPIB (General Purpose
Interface Bus) or Network.
The AWG400-Series Arbitrary Waveform
Generator GPIB is compatible with
other devices that meet IEEE standard 488.2.
The AWG400-Series Arbitrary Waveform
Generator allows you to create sine,
triangle, square, ramp, and complex waves, as well as direct current and noise signals. It allows you to set waveform attributes, such as frequency, amplitude, and offset.
This instrument contains a hard disk drive, a 3.5-inch floppy disk drive, and an
Ethernet interface for storing and recalling waveform data and instrument
settings.
Main Features
The AWG400-Series Arbitrary Waveform
Generator contains the following main features:
200 MS/s sampling rate
16-bit DA converter
4 M-word waveform memory
Two arbitrary marker outputs per channel
Five waveform editors
Service manual
Manual type:
Service manual
Pages:
322
Size:
4.9 MB
Language:
english
Revision:
Manual-ID:
070-A811-52
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
Sept. 22, 2019
MD5:
94900de7-9973-8e9f-0740-28f65d7e108a
Downloads:
461