The P68xx Logic Analyzer Probes connect a TLA7Axx Series Logic Analyzer module to a target system. The P6810, P6860 and P6880 probes consists of 34 channels, while the P6864 probe consists of 17 channels. You can connect the P6810 probe to the target system through podlet holders or leadsets. In addition, a variety of leadsets, SMT KlipChips and adapters aid in your connection to the target system. The P6860 probe can be connected through the use of the compression land pattern or a Mictor connector using the Mictor-on-PCB to P6434 to Compression adapter. The P6880 probe is designed for connection to the compression land pattern only configured for differential signals. The P6880 is not compatible with either the Mictor-on-PCB to P6860 probe adapter or the Compression-on-PCB to P6434 probe adapter. The P6864 probe can be connected through the use of the compression land pattern. Note that the P6864 is designed to minimize the needed area on the circuit board for connections when using the 4X clocking mode in the logic analyzer module.