Tektronix TLA7PG2 TV pattern generator
Manufacturer:
Model:
TLA7PG2
Date:
unknown
Class:
Type:
SubType:
Pattern Generator and Probes
Information
The
TLA7PG2 Pattern
Generator is a 64-channel, programmable
pattern
Generator module with sequential control that plugs
into the TLA700 series mainframes, and is intended for use
as an integral component of the
Tektronix Logic
Analyzer
Family series of products.
The pattern
Generator module provides multichannel signals
for use in applications, such as simulation of missing
system elements, erroneous signals for stress
testing, or extended analysis for simulating a device under
test.
You can put circuits in a desired state and operate the
pattern
Generator at full speed or single step it through a
series of states. The
TLA7PG2 Pattern
Generator can also
generate infrequently encountered test conditions to test a
hardware design or
Software program for robustness.
The
TLA7PG2 Pattern
Generator supports the following probes:
P6470 TTL/CMOS
P6471 ECL
P6472 PECL/LVPECL
P6473 LVDS
P6474 LVCMOS
P6475 Variable
You can have up to four probes on each pattern
Generator.
Following are some of the key features of the TLA7PG2
Pattern Generator:
Provides up to 64 channels
Offers a Jump If condition for all data blocks (maximum of
4000) up to clock rates of 268 MHz
The
TLA7PG2 Pattern
Generator can fully test circuits at
real clock speeds, without having to use improvised setups.
Manual type:
Service Manual
Pages:
252
Size:
1.80 Mbytes (1886972 Bytes)
Language:
english
Revision:
Manual-ID:
071-0714-01
Date:
unknown
Quality:
Electronic document, no scan, very well readable.
Upload date:
2017 12 26
MD5:
4c7bc52a3e8a9200153473ab866ecddd
Downloads:
580
Information
This is the service manual for the
TLA7PG2 Pattern
Generator. The manual
contains information needed to service the pattern
Generator
to the module level.
The following lists contains a brief description of each
manual section.
The Specifications contains a description and a list of the
characteristics of
the pattern
Generator and pattern
Generator probes.
The Operating Information includes general information and
operating
instructions at the level needed to safely power on and
service the pattern
generator.
The Theory of Operation contains circuit descriptions that
support general
service to the module level.
The Performance Verification contains procedures to verify
the functional
operation of the pattern
Generator and modules as well as
procedures to
verify the performance to advertised specifications.
The Adjustment Procedures normally lists procedures to
adjust the instrument to meet advertised specifications. At
this printing, there are no
adjustment procedures required for the pattern
Generator module.
The Maintenance contains information and procedures for
performing
preventive and corrective maintenance of the pattern
Generator module.
These instructions include cleaning and fault isolation to
the module.
The Options contains information about options and
Accessories that are
available for the instrument.
The Replaceable Electrical Parts contains a statement
referring you to the
Mechanical Parts List, where both electrical and mechanical
parts are listed.
The Diagrams contains block diagrams and cabling diagrams
that are useful
in isolating failed components.
The Replaceable Mechanical Parts includes a table of all
replaceable parts,
their descriptions, and their
Tektronix part numbers.
Manual type:
User Manual
Pages:
65
Size:
363.76 Kbytes (372488 Bytes)
Language:
english
Revision:
Manual-ID:
071-1017-01
Date:
unknown
Quality:
Electronic document, no scan, very well readable.
Upload date:
2019 09 23
MD5:
c5c7de9c89e846f41c1d04e2f51fa1f4
Downloads:
1711
Information
This document supports
Tektronix Logic
Analyzer Family
Software Version 4.1 and
Tektronix Pattern
Generator Software Version 1.3 and above.
General Safety Summary ... .
Service Safety Summary ... .
Related Documentation ... .
Contacting
Tektronix ... .
Product Description ... .
Probe Lead Sets and Cables ... .
Connecting the Standard Probes ... .
Connecting the
P6475 Probe ... .
Probe Connectors and Signal Names ... .
Probe Overview ... .
Probe Dimensions ... .
P6475 Installation Requirements ... .
Input/Output Circuits ... .
Timing Diagrams ... .
Specifications ... .
Functional Check ... .
Inspection and Cleaning ... .
Static Discharge Information ... .
Configuring Probes ... .
Repackaging ... .
Comments