Tektronix TVS625A Analyzer
Manufacturer:
Model:
TVS625A
Date:
unknown
Class:
Type:
SubType:
Waveform Analyzer
Information
The
TVS600 Series Waveform Analyzers are a family of C-size, double-wide
VXI modules suitable for use in a variety of test and measurement applications and systems. Many key features are listed below:
Four standard configurations with full-featured, 1 MW/50 W inputs: TVS641
and
TVS645 have four channels,
TVS621 and
TVS625 have two channels.
A maximum realtime digitizing rate up to 5 GSample/second with an analog
bandwidth up to 1 GHz.
A maximum record length of 30,000 samples with 8-bit vertical resolution.
Full programmability using a SCPI command set.
Acquisition modes such as sample, envelope, and average.
A full complement of internal triggering modes such as edge and pulse, plus
VXI backplane and external trigger sources.
Manual type:
Service Manual
Pages:
152
Size:
6.64 Mbytes (6958512 Bytes)
Language:
english
Revision:
Manual-ID:
070-9915-02
Date:
unknown
Quality:
Electronic document, no scan, very well readable.
Upload date:
2019 09 22
MD5:
bed7e2594b112ebc1473e2646fd4b69b
Downloads:
2684
Information
This manual is divided into chapters, such as Specifications and Performance Verification. Within each chapter, the information is further divided into subsections such as Product Description and Equipment Required.
Subsections that contain procedures also contain introductions before the procedures. Be sure to read these introductions because they provide information that is needed to do the service correctly and efficiently. The following list provides a brief description of the chapters contained in this manual:
■ Specifications describes the waveform
Analyzer and the characteristics that apply to it.
■ Operating Information includes general information and operating instructions at the level needed to safely power on and service the waveform
Analyzer.
■ Theory of Operation contains circuit descriptions that support general service to the module level.
■ Performance Verification contains an automatic
Software procedure to verify that the waveform
Analyzer functions properly and meets warranted specifications.
■ Adjustment Procedures refers to the Performance Verification section for adjusting the waveform
Analyzer to meet warranted specifications.
■ Maintenance contains information and procedures for performing preventive and corrective maintenance. These instructions include cleaning, module replacement, and fault isolation to the module level.
■ Options describes standard
Accessories, optional
Accessories, and options that may be installed in the waveform
Analyzer.
■ Electrical Parts List refers you to Mechanical Parts List, where both electrical and mechanical modules are listed. See below.
■ Diagrams contains a block diagram and an interconnection diagram that are useful when isolating failed modules.
■ Mechanical Parts List contains an illustration that shows all replaceable modules, and a table that lists the replaceable modules, their descriptions, and their
Tektronix part numbers.
Comments