Xerox WorkCentre M24 Printer
Manufacturer:
Model:
WorkCentre M24
Date:
2003
Class:
Type:
SubType:
Manual type:
Service Manual
Pages:
1480
Size:
51.30 Mbytes (53789805 Bytes)
Language:
english
Revision:
Manual-ID:
701P40660
Date:
2003 09 01
Quality:
Electronic document, no scan, very well readable.
Upload date:
2020 05 11
MD5:
8cdd6bf24a70a99e85086ffa3a426f43
Downloads:
2181
Information
This Service Manual is divided into seven sections. The titles of the sections and a description
of the information contained in each section are contained in the following paragraphs:
Section 1: Service Call Procedures
This section contains procedures that determine what actions are to be taken during a service
call on the machine and in what sequence they are to be completed. This is the entry level for
all service calls.
Section 2: Status Indicator RAPs
This section contains the diagnostic aids for troubleshooting the Fault Code and non-Fault
Code related faults (with the exception of image quality problems).
Section 3: Image Quality
This section contains the diagnostic aids for troubleshooting any image quality problems, as
well as image quality specifications and image defect samples.
Section 4: Repairs/Adjustments
This section contains all the Adjustments and Repair procedures.
Repairs
Repairs include procedures for removal and replacement of parts which have the following
special conditions:
When there is a personnel or machine safety issue.
When removal or replacement cannot be determined from the exploded view of the
Parts List.
When there is a cleaning or a lubricating activity associated with the procedure.
When the part requires an adjustment after replacement.
When a special tool is required for removal or replacement.
Use the repair procedures for the correct order of removal and replacement, for warnings, cau-
tions, and notes.
Adjustments
Adjustments include procedures for adjusting the parts that must be within specification for the
correct operation of the system.
Use the adjustment procedures for the correct sequence of operation for specifications, warn-
ings, cautions and notes.
Section 5: Parts Lists
This section contains the Copier/Printer Parts List.
Section 6: General Procedures/Information
This section contains General Procedures, Diagnostic Programs, and Copier/Printer Informa-
tion.
Section 7: Wiring Data
This section contains drawings, lists of plug/jack locations, and diagrams of the power distribu-
tion wire networks in the machine. Individual wire networks are shown in the Circuit Diagrams
contained in Section 2. This section also contains the Block Schematic Diagrams.
Section 9: Installation
This section contains installation information for various machine components.
Comments