Yaesu - FRG-7 - Receiver
Manufacturer:
Image 1 of 1
If you have any other photos or manuals for the
Yaesu FRG-7
you can
upload the files here.
Equipment:
FRG-7
Date:
Category:
Group:
Sub Group:
Information
■ GENERAL COVERAGE
The model FRG-7 is a solid-state AC-DC communication receiver designed to cover the band from 0.5 MHz to 29.9 MHz with extremely high performance. It can be used as a stand-by receiver by Amateur Radio Operators.
■ WIDE VERSATILITY
The receiver can be used for listening to various types of communications, commercial radio stations on medium wave, international short wave, amateur bands and citizen band.
■ EXCEPTIONAL SENSITIVITY AND EXCELLENT STABILITY
The Wadley Loop System coupled with a triple conversion super heterodyne system guarantees an extremely high sensitivity and excellent stability. The dial indicator with 1 MHz VFO range will enable you to enjoy simplified tuning.
■ 5 KHZ DIRECT DIAL READOUT
The extremely stable VFO equipped with precision dial mechanism permits 5 kHz direct dial readout, thus permitting presetting of dial for your desired station even when not on the air with assurance of "on the target” reception.
■ ACCEPTS ALL TYPES OF MODES
It features receiving modes of SSB (USB LSB) for two way communications, C.W. for Morse Code communication and A.M. for general broadcasting stations.
■ R.F. ATTENUATOR
The selectable three position RF attenuator is effective when tuning local or high powered stations. Tuning for a weak desired station adjacent to an strong unwanted signal, proper selection of DX or LOCAL position will help reduce the interference considerably.
■ EXCELLENT SELECTIVITY
The ceramic filters guarantee sufficient bandwidth and high selectivity by rejecting unwanted signals and interferences.
■ AUTOMATIC NOISE SUPPRESSION CIRCUIT
When impulse type noise is experienced the AM/ANL position will activate the automatic noise suppression circuit which effectively eliminates all pulse type noise, permitting you to enjoy noise free reception.
■ THREE POSITION TONE SELECTOR
The audio spectrum in SSB communication is limited within the range of 300—2700 Hz. Broadening the bandwidth of the receiver will introduce more noise or interference unnecessarily. The tone selector will limit the audio spectrum and its selectable positions will increase readability of the signal being received.
It offers three position: LOW (high cut), NORMAL, and NARROW (high and low cut)
■ DISTORTION AND FADE FREE RECEPTION
The active AGC (automatic gain control) circuit assures a distortion fade free reception.
■ ACCEPTS THREE DIFFERENT TYPE OF POWER SOURCE
The receiver can be operated on A.C., D.C., or internal battery supply. When more than two power supplies are connected, it automatically selects the most economical source. The light switch will conserve energy when operated on batteries. The line cord retainer comes in handy in portable operation.
1 Manual
Datasheet
Manual type:
Datasheet
Pages:
5
Size:
1.3 MB
Language:
english
Revision:
Manual-ID:
Date:
Quality:
Scanned document, all readable.
Upload date:
July 13, 2020
MD5:
61c556d0-83af-fee0-c90d-2953e1f276b4
Downloads:
183