The model FT-I01B/277B SSB Transceiver
is a precision
built, compact high performance Transceiver
design providing SSB (USB, LSB selectable), CW and AM modes
of operation. The Transceiver
operates at an input of 260
watts SSB, 180 watts CW and 80 watts AM on all bands 160 to
All circuits, except the Transmitter
driver and linear
amplifier, are transistorized and composed of standard
computer type plug-in modules, permiting easy maintenance.
is self-contained, requiring only an Antenna
and an A.C. mains for home, portable or mobile operation.
may be operated from 100/110/
117/200/220/234 volts AC when appropriately wired but is
normally supplied for 117 volt AC and 12 volt DC operation.
The two-way solid state Power Supply
is an integral part of
the unit. Two power cords are provided with the Transceiver
Selection of AC or DC power source is automatically made
when the proper line cord plug is inserted.
For mobile operation a separate switch is provided on the
front panel to turn off the tube heaters while in
the receive mode. In this mode the Transceiver
0.5 amp. less than your auto dash lights.
All accessories, such as VOX, break-in CW with side-tone, 25
and 100 KHz calibrators, noise blanker, 10 MHz WWV are
built-in. In addition , dual VFO adaptor, crystal control
adaptor, speaker and clarifier are integral parts of the
unit. Provision is made for the installation of 600 Hz
crystal filter for the expert CW* DX operator. The CW filter
is selected automatically when the Transceiver
is placed in the CW position.
The entire Transceiver
weighs approximately 30 pounds, is 13
1/2” wide, 6” high, 11 1/2” deep. Construction is of
heavy-gauge steel which provides an extremely rugged
package, virtually immune to the effects of vibration and shock.
The SP 101P/277P. combination Phone
patch and external
speaker, is a valuable optional accessory for base
operation. The.unit features an elliptical type speaker for
high quality voice reproduction. Other optional
equipment includes the FV-101B/277B external VFO and mobile