The FT-180A high performance HF SSB transceiver features compact size and simplicity of operation for mobile or base applications. The electrical and mechanical design of this tough transceiver withstands heavy-duty operation, assuring the user of many years of reliable service. ■ Compact Size With the size of cars getting smaller and smaller, the installation of other transceivers may prove impossible. But the compact size of the FT-180A makes installation in the smallest of cars a straightforward procedure. ■ Choices of Output Power The FT-180A allows you to select PA output power of 10W, 50W or 100W (SSB). When ordering your FT-180A from your dealer, be sure to specify the output power you require. ■ 6 Channel Operation As many as 6 simplex or 3 semi-duplex channels may be installed. Automatic AM selection when switching to a specified channel can be programmed, if you desire this function. All crystals are optional. ■ Effective Noise Blanker The built-in noise blanker eliminates most noise caused by ignition systems, thus allowing reception of weaker signals during mobile operation, and providing clear, highly readable audio signals. ■ Equipped for DC operation The FT-180A is equipped for 13.4V DC operation. For base station installations, the FP-700 makes an excellent regulated DC power supply for the FT-180A. Minimum power consumption and a solid state power amplifier make the FT-180A perfect for mobile operation, too. ■ Excellent Frequency Stability The temperature-controlled crystal oven provides state of the art stability for minimum drift during wide variations in temperature. (Crystal oven optional)