EIP Incorporated - 548A - Frequency counter
Manufacturer:
Image 1 of 3
If you have any other photos or manuals for the
EIP Incorporated 548A
you can
upload the files here.
Equipment:
548A
Date:
1981
Category:
Group:
Sub Group:
Information
The 54XA series counters are microprocessor-based heterodyne
instruments. The 545A and 548A span the frequency range
from 10 Hz to 18 GHz and 10 Hz to 26.5 GHz. respectively.
The model 548A, when equipped with frequency extension
capability (Option 06), is used in conjunction with a
remote sensor (See Model 590) to measure up to 110 GHz.
Using keyboard control, the 54XA series counters provide
frequency offsets and frequency selectivity. Options
include Power Measurement, full Systems capability via
GPIB or BCD/Remote Programming and D/A Converter output.
Full frequency range is covered in three bands. Band 1
is a high impedance input (1 M ohm/20 pF), and spans a
10 Hz to 100 MHz range, with a sensitivity of 25 mV RMS.
Band 2 has an input impedance of 50 ohms, a 10 MHz to
1 GHz range, with a sensitivity of —20 dBm. Band 3
has an input impedance of 50 ohms nominal over a range
of 1 GHz to 18 (or 26.5) GHz, and a sensitivity to -30 dBm.
For frequencies above 26.5 GHz a remote sensor, with an
appropriate waveguide input, is called Band 4.
Measurements are presented on a 12 digit LED display
that is sectionalized to read GHz, MHz, kHz, and Hz.
When the optional power measurement function is activated,
the digits on the far right display power in dBm with
0.1 dB resolution, and frequency resolution is limited
to 100 kHz.
1 Manual
Service and user manual
Manual type:
Service and user manual
Pages:
242
Size:
45.2 MB
Language:
english
Revision:
Eighth Edition
Manual-ID:
5580033-00
Date:
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
March 30, 2013
MD5:
667f3b32-ea1c-c25c-b4a9-ce6296757305
Downloads:
1664