BWD Electronics - 246A - Netzteil
Hersteller:
Gerät:
246A
Datum:
1977
Kategorie:
Gruppe:
Untergruppe:
Informationen
Model BWD 246A dual high stability, all Silicon Solid State
DC Power Supply provides both Constant Voltage and Constant
Current operation over the full operating range. Front pane]
switching enables the supply to be used up to the following
ratings.
1. INDEPENDENT 2 x 0 - 3&V at 0 - 5 Amp.
2. SERIES 0 - 72V at 0 - 5 Amp.
3. PARALLEL 0 - 3^V at 0 - 10 Amp.
Integrated Circuit control and reliable silicon
semi-conductors coupled with the advanced circuit design
provide very high stabilisation and regulation with low ripple.
Using a single unit, switched to any of the three modes of
operation, the output may be programmed by several sources
to provide the following operation.
1. Remote Load Sensing
2. Constant Voltage Remote Resistance Programming
3. Constant Voltage Remote Voltage Programming
M. Constant Current Remote Resistance Programming
5- Constant Current Remote Voltage Programming
With two or more units, not necessarily of the same Model,
(see Section 4 for list of compatible supplies), the
following operational modes can be jsed.
6. Auto Series with two or more units
7. Auto Tracking, +ve to +ve, +ve to -ve, -ve to -ve, using
two or more units - '
8. Auto Parallel with two or more units
The MASTER SUPPLY of any of the above modes using multiple
supplies may be programmed internally or by any of the modes
1 to 5.
1 Handbuch
Reparatur und Bedienungsanleitung
Dokumenttyp:
Reparatur und Bedienungsanleitung
Seitenanzahl:
74
Größe:
3,0 MB
Sprache:
Englisch
Revision:
Issue 13
Dokument-ID:
Datum:
Januar 1977
Qualität:
Gescanntes Dokument, teilweise schwer oder teilweise nicht zu lesen.
Upload Datum:
4. Juni 2017
MD5:
6662ef44-79fe-3fe3-862d-9410e7b5fe50
Downloads:
475