General Radio Company - 1362 - Oscillator
Hersteller:
Bild 1 von 2
Weitere Anleitungen und Fotos für ein
General Radio Company 1362
können sie
hier hochladen.
Gerät:
1362
Datum:
1967
Kategorie:
Gruppe:
Untergruppe:
Informationen
The 1362 UHF Oscillator (Figure 1-1) is a general-purpose
oscillator for the radio-frequency laboratory. Covering the
calibrated range from 220 to 920 MHz, this oscillator
provides adequate power to drive bridges, slotted lines,
impedance comparators, and other measuring equipment. The
output is brought through an attenuator, calibrated in
relative power levels, making the oscillator suitable for
the testing of receivers. Direct sine-wave, square-wave, or
pulse amplitude modulation is possible. Amplitude modulation
free from incidental fm can be obtained with an external
diode modulator. Connected to a mixer, the oscillator can be
used as the local oscillator in a heterodyne receiver to
convert the GR 1236 I-F Amplifier, or a low-frequency
communications receiver, into a detector for uhf signals.
Square-wave and pulse amplitude modulation can be obtained
with the GR Type 1264 Modulating Power Supply (Figure 1-2),
or leveled
output can be obtained with the GR Type 1263
Amplitude-Regulating Power Supply.
1 Handbuch
Reparatur und Bedienungsanleitung
Dokumenttyp:
Reparatur und Bedienungsanleitung
Seitenanzahl:
28
Größe:
15,4 MB
Sprache:
Englisch
Revision:
Dokument-ID:
1362-0100 B
Datum:
Januar 1967
Qualität:
Gescanntes Dokument, alles ist lesbar.
Upload Datum:
29. Dezember 2016
MD5:
74caa15b-d4cf-cac2-58bd-356f61c30d4b
Downloads:
538