Krohn-Hite Corporation - 7500 - Amplifier
Hersteller:
Bild 1 von 1
Weitere Anleitungen und Fotos für ein
Krohn-Hite Corporation 7500
können sie
hier hochladen.
Gerät:
7500
Datum:
2004
Kategorie:
Gruppe:
Untergruppe:
Informationen
The Krohn-Hite Model 7500, shown in Figure 1, is an all
solid state, direct coupled amplifier, that provides 75
watts of continuous power (150 watts at DC), at 125 volts
RMS, from DC to 100 kHz. Frequency response of the 7500 is
fiat to within 0.1 db, and harmonic distortion at full power
output is less than 0.1%, from DC to 10 kHz. A front panel
control selects 20 db (10) or 40 db (100) of fixed gain, or
zero to 40 db of continuously variable gain. The output of
the 7500 can be offset ±200 volts, open-circuit, by means of
a front pane! DC offset control. The 7500 provides
selectable input coupling, either direct (DC) or capacitive
(AC).
The amplifier’s output is protected from short-circuit or
other abnormal load conditions by a unique output protection
circuit, that uses a modified form of foldback current
limiting. The output stage is convection cooled by a special
heat sink configuration.
An optional rack-mounting kit (part no. RK-519) is available
for installing the unit in a standard 19” rack spacing.
1 Handbuch
Bedienungsanleitung
Dokumenttyp:
Bedienungsanleitung
Seitenanzahl:
20
Größe:
846,7 KB
Sprache:
Englisch
Revision:
Dokument-ID:
Datum:
Qualität:
Elektronisches Dokument, kein Scan, sehr gut lesbar.
Upload Datum:
6. September 2015
MD5:
72b3f801-2b5e-e54e-604b-be9a70e62b11
Downloads:
414