Tektronix - 1121 - Amplifier
Hersteller:
Gerät:
1121
Datum:
1960
Kategorie:
Gruppe:
Untergruppe:
Informationen
The Tektronix Type 1121 Amplifier is a self-contained two
stage amplifier designed primarily to increase the
sensitivity of the equipment with which it is used. Overall
gain of 'the unit is 100. Thus, with maximum input of ±10
mv, the output is ±1 v. A cascode-type step attenuator
permits attenuation of the input signal from IX to 500X in
nine calibrated steps. This allows a signal of up to ±5
volts at the input connector without overloading the
amplifier. Connection between the Type 1121 and the
equipment it is to drive is via a matched 93-ohm coaxial
cable, so that the separation of the instruments may be 100
feet or more. As in all Tektronix instruments, primary
emphasis has been placed on the achievement of optimum
transient response. The pass band of the Type 1121 is in
excess of 17 megacycles.
Its compactness and versatility make the Type 1121 well
adapted for use with any oscilloscopes or other equipment
employing wide-band amplification.
1 Handbuch
Reparatur und Bedienungsanleitung
Dokumenttyp:
Reparatur und Bedienungsanleitung
Seitenanzahl:
33
Größe:
15,1 MB
Sprache:
Englisch
Revision:
Dokument-ID:
070-204
Datum:
Januar 1960
Qualität:
Gescanntes Dokument, alles ist lesbar.
Upload Datum:
28. Dezember 2017
MD5:
9578a12f-17b5-8cf3-1755-5336d32912ac
Downloads:
534