The 3026 is a portable real time 3 GHz spectrum analyzer with real-time frequency analysis functions. The incorporated 3 GHz down converter enables you to perform spectrum analysis, time domain analysis, and analog modulation analysis of Radio Frequency (RF) signals without connecting any external devices. The 3026, with the adoption of new architecture, can acquire time and frequency domain data simultaneously. It can also accurately capture various kinds of signals with a wide variety of triggering functions. Real-time trigger functions in frequency domain allow you to trigger on instantaneous events such as the starting point of a burst signal. Using the trigger functions in time domain, triggering is available on impulse noises which are barely captured in frequency domain. In addition, the 3026 provides measurement functions that can evaluate the performance of radio devices with simple operation. Moreover, four types of data display functions offered in the system can allow you to analyze the acquired data more precisely. Features The 3026 has the following features: Measurement frequency range: 50 Hz to 3 GHz Measurement span: 100 Hz to 3 GHz Complete real time frequency analysis Concurrent processing of real time frequency analysis and analog modulation analysis Provides comprehensive measurement functions to evaluate radio devices such as occupied bandwidth (OBW), adjacent channel leakage power (ACP) and power consumption. Four types of data display: Spectrum display Spectrogram display Waterfall display Analog demodulation display (AM, PM, FM, and FSK) A range of trigger functions: Mask pattern trigger Level trigger External trigger Simultaneous data acquisition in frequency domain and time domain 6.5 inch full-color TFT display Equipped with a hard disk drive and a 3.5 inch floppy disk drive A selection of interface ports: GPIB port 10 BASE-T port VGA output port Printer port