Tektronix - 7B90P - Generator
Hersteller:
Gerät:
7B90P
Datum:
1978
Kategorie:
Gruppe:
Untergruppe:
Informationen
The TEKTRONIX 7B90P Programmable Time Base provides
calibrated sweep rates for TEKTRONIX 7000-Series
programmable mainframes. The 7B90P may be inserted in any
7000-Series mainframe without damage, but is recommended for
use only in a programmable mainframe.
The 7B90P has calibrated sweep rates ranging from 500
picoseconds/ division to 500 milliseconds/division. Other
operating features that can be selected are: normal or
automatic triggering, high or low frequency roll-off
(attenuation) of the triggering signal, variable trigger
hold-off, internal or external triggering, 1X or 10X sweep
magnification, and repetitive or single-sweep mode.
The 7B90P has readout encoding capability. Thus, horizontal
scale factors can be displayed on a programmable mainframe
having readout display capability.
All functions of the 7B90P can be remotely programmed except
for the Sweep Calibration (SWP CAL) adjustment and the
External Trigger Input Termination (TERM) switch. The status
of each programmable function can be set or read by commands
sent over the IEEE 488 bus. These commands can be sent in
either a high-level or low-level language, Doth of which are
decoded by a microprocessor in the 7B90P.
1 Handbuch
Reparatur und Bedienungsanleitung
Dokumenttyp:
Reparatur und Bedienungsanleitung
Seitenanzahl:
230
Größe:
56,8 MB
Sprache:
Englisch
Revision:
revised
Dokument-ID:
070-2309-00
Datum:
September 1984
Qualität:
Gescanntes Dokument, alles ist lesbar.
Upload Datum:
23. April 2017
MD5:
0b8c30d2-b76a-224f-e9bc-b153b4b835d6
Downloads:
591