Tektronix - FG 503 - Generator
Hersteller:
Gerät:
FG 503
Datum:
1974
Kategorie:
Gruppe:
Untergruppe:
Informationen
The FG 503 Function Generator is designed to operate in a TM
500 series power module. Low distortion sine, square and
triangle waveforms from 1 Hz to 3 MHz, are available at the
front panel. A +2.5 V square wave trigger also is available
at the front panel. Variable dc offset of =5 V is provided.
A custom timing switch position is provided. This allows the
user to install a timing capacitor for custom tailoring the
frequency range of the FG 503.
A voltage-controlled frequency (VCF) input controls the
output frequency from an external voltage source. The output
frequency can be swept above or below the selected
frequency, to a maximum of 1000:1, depending on the polarity
and amplitude of the VCF input and the selected output
frequency.
The variety of swept and modulated signals available from
the FG 503 make it especially useful for such applications
as testing servo-system or amplifier response, distortion
and stability. It is also useful for FM generation or as a
variable beat-frequency oscillator. The square wave trigger
output can be used as a source for TTL logic, or to
synchronize an external device such as an oscilloscope or
counter.
1 Handbuch
Reparatur und Bedienungsanleitung
Dokumenttyp:
Reparatur und Bedienungsanleitung
Seitenanzahl:
41
Größe:
2,6 MB
Sprache:
Englisch
Revision:
First Edition
Dokument-ID:
070-1727-00
Datum:
April 1974
Qualität:
Gescanntes Dokument, alles ist lesbar.
Upload Datum:
28. Dezember 2017
MD5:
42bd1255-9f0e-ea73-9edf-5d4adecb9510
Downloads:
593