Yaesu - FT-5100 - Transceiver
Hersteller:
Gerät:
FT-5100
Datum:
1992
Kategorie:
Gruppe:
Untergruppe:
Informationen
The FT-5100 is a mobile dual-receive and cross-band full
duplex amateur transceiver descending directly from the
FT-5200, including most of its features and adding some of
its own. Miniaturization technology allows a built-in
antenna duplexer, dual full-frequency liquid crystal display
(with signal strength bargraph for each display channel),
8-level automatic display/button lighting dimmer, and now
dual receive capability on two channels on different bands,
or in the same band. An efficient thermally-switched cooling
fan allows up to 50 watts VHF and 35 watts UHF output.
Ninty-four freely tunable memories (forty-seven per band)
offer complete programmability and scanning functions, such
as independent transmit and receive frequencies,
programmable repeater offsets and two scan ranges on each
band, selectable scan resume modes and memory skip, priority
monitoring and 1-touch instant-re-call CALL channels for
each band. Channel steps are user-selectable, and Automatic
Repeater Shift can be activated to automatically set
standard repeater shifts when tuning to repeater subbands
(where applicable). Versions are available with microphone
button control of a 1750-Hz burst generator (with the
MH-26d8 or MH-26e8 Speaker/Mic), VFO/memory or band selection.
The MW-1 Wireless Microphone/Controller option duplicates
the controls (including volume and squelch), adding a dtmf
(Dual-Tone, Multi-Frequency) keypad and microphone. You can
select a 3-digit ID code and your receiver stays quiet until
your code is received (from any DTMF-equipped transceiver).
You can also have a code open the squelch or a ring like a
telephone. PAGE mode displays the caller’s code so you know
who is calling. One-touch paging transmits paging codes
whenever the PTT switch is pressed, if desired. Four banks
of seven 3-digit code memories each store your ID plus that
of the calling station and those of five other stations or
groups for calling/monitoring (autopatching requires the
MH-26F8 or MH-27b8 DTMF keypad microphone, or the MH-15d8
with its own auto-dial dtmf memories). A 38-tone
programmable CTCSS (Continuous Tone-Coded Squelch System)
encoder is built-in, and CTCSS tone squelch operation on
both receiving channels is available with the FTS-22 Dual
Band CTCSS Decoder option, which also provides a
telephone-type CTCSS Bell alerting function.
1 Handbuch
Bedienungsanleitung
Dokumenttyp:
Bedienungsanleitung
Seitenanzahl:
41
Größe:
2,1 MB
Sprache:
Englisch
Revision:
Dokument-ID:
Datum:
Qualität:
Gescanntes Dokument, teilweise schwer oder teilweise nicht zu lesen.
Upload Datum:
27. Juli 2014
MD5:
ee70370d-f0ff-f90d-bd38-ed222da86c59
Downloads:
1055