Boonton Electronic - 2510 - Calibrator
Manufacturer:
Image 1 of 1
If you have any other photos or manuals for the
Boonton Electronic 2510
you can
upload the files here.
Equipment:
2510
Date:
1988
Category:
Group:
Sub Group:
Information
The Model 2510 is a DC source with eight levels and three
impedances that simulate Boonton sensors. The 2510 is used
to calibrate all Boonton RF Power meters and RF Voltmeters
such as the 4200, 4300, 4210, 42B/BD/C/CD, 9200/B, 92BD, and
92EA. These meters, although RF meters, require DC
calibration of the "box” (main instrument) independently of
the sensor so that all "boxes" are identical at the sensor
output port, which is DC. This means that all boxes are
interchangeable, without the requirement for AC calibration
when swapped.
The output of the 2510 is differential with a special
Boonton connector that matches the Boonton power meter and
voltmeter cable system. A special double shielded
differential cable is used for interconnections.
The 2510 is GPIB bus programmable with all functions
available on the bus except the power switch.
The 2510 is suitable for performance verification of Boonton
meters (main instrument less sensor) , and for
troubleshooting, by isolating the problem to the sensor or
the main instrument.
1 Manual
Service and user manual
Manual type:
Service and user manual
Pages:
52
Size:
2.1 MB
Language:
english
Revision:
Manual-ID:
981014Q0A
Date:
January 1988
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
Jan. 22, 2017
MD5:
7bc45ab2-dbd4-d456-5f12-1feb0e80e1ce
Downloads:
521