Krohn-Hite Corporation - 7500 - Amplifier
Manufacturer:
Image 1 of 1
If you have any other photos or manuals for the
Krohn-Hite Corporation 7500
you can
upload the files here.
Equipment:
7500
Date:
2004
Category:
Group:
Sub Group:
Information
The Krohn-Hite Model 7500, shown in Figure 1, is an all
solid state, direct coupled amplifier, that provides 75
watts of continuous power (150 watts at DC), at 125 volts
RMS, from DC to 100 kHz. Frequency response of the 7500 is
fiat to within 0.1 db, and harmonic distortion at full power
output is less than 0.1%, from DC to 10 kHz. A front panel
control selects 20 db (10) or 40 db (100) of fixed gain, or
zero to 40 db of continuously variable gain. The output of
the 7500 can be offset ±200 volts, open-circuit, by means of
a front pane! DC offset control. The 7500 provides
selectable input coupling, either direct (DC) or capacitive
(AC).
The amplifier’s output is protected from short-circuit or
other abnormal load conditions by a unique output protection
circuit, that uses a modified form of foldback current
limiting. The output stage is convection cooled by a special
heat sink configuration.
An optional rack-mounting kit (part no. RK-519) is available
for installing the unit in a standard 19” rack spacing.
1 Manual
User manual
Manual type:
User manual
Pages:
20
Size:
846.7 KB
Language:
english
Revision:
Manual-ID:
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
Sept. 6, 2015
MD5:
72b3f801-2b5e-e54e-604b-be9a70e62b11
Downloads:
414