IFR - FM/AM-1600S - Communications Service Monitor
Manufacturer:
Image 1 of 1
If you have any other photos or manuals for the
IFR FM/AM-1600S
you can
upload the files here.
Equipment:
FM/AM-1600S
Date:
1991
Category:
Group:
Sub Group:
Information
The FM/AM-1600S is a microprocessor controlled, digitally
synthesized communication service monitor which combines the
operations of many different test instruments into a single,
compact unit. Functions the FM/AM-1600S is capable of
performing include:
RF Generator Duplex
Spectrum Analyzer DMM
Distortion Meter Audio Frequency Meter RF Power Meter Signal
Strength Meter Phase Meter Tracking Generator Digital Radio
Paging Encode and Decode
Receiver AF Generator Oscilloscope Deviation (Peak) Meter
SINAD Meter Frequency Error Meter Modulation Meter Bit Error
Rate Meter Deviation (RMS) Meter Cable Fault Detector Analog
Radio Paging Encode and Decode
The FM/AM-1600S utilizes an alphanumeric keypad, dedicated
function keys, multitask Soft Function Keys and a
high-resolution color CRT to display, enter and edit
functions and data. Testing with this instrument can be done
remotely or manually. The FM/AM-1600S can perform tests from
pre-programmed setups or formats determined at the time of
the test.
Microprocessor controlled memory allows storage and recall
of parameters for each of the testing modes as well as
storage and recall of Oscilloscope and Spectrum Analyzer
traces for signal comparison.
The FM/AM-1600S is capable of generating modulated or
unmodulated carrier signals from 250 kHz to 999.9999 MHz (in
100 Hz steps). The output level is variable from -137 dBm to
0 dBm. Modulation types include AM, FM and PM. Modulation
can also be applied from an external source. The RF
Generator also functions as a tracking generator for swept
measurements or as an offset generator in Duplex Mode.
Metering functions available for this operation mode include
SINAD, DMM, Distortion and Audio Frequency Level meters. The
Oscilloscope and Spectrum Analyzer are also available for
use on the RF Generator Operation Screen.
1-3 RECEIVER
The FM/AM-1600S is capable of receiving modulated and
unmodulated signals from 250 kHz to 999.9999 MHz (in 100 Hz
steps). The FM/AM-1600S receives AM, FM, PM, and SSB
modulated signals. Metering functions in the FM/AM-1600S
available with the Receiver include RF Power, Modulation,
Deviation, Distortion, Frequency Error, AF Frequency, Signal
Strength and SINAD meters and counters. The Oscilloscope and
Spectrum Analyzer are also available for use on the Receiver
Operation Screen. The FM/AM-1600S Receiver is capable of
executing user defined frequency scan operations as well as
single frequency operations. The Receiver accesses "off the
air" signals through the ANTENNA IN Connector or higher
powered signals are accessed through the T/R Connector.
2 Manuals
User manual
Manual type:
User manual
Pages:
478
Size:
14.4 MB
Language:
english
Revision:
2
Manual-ID:
1002-8600-000
Date:
Quality:
Scanned document, all readable.
Upload date:
Jan. 20, 2014
MD5:
9dfc3c96-5ee4-3df5-8766-d68fab3f9383
Downloads:
1
User manual
Manual type:
User manual
Pages:
428
Size:
12.6 MB
Language:
english
Revision:
1.10
Manual-ID:
1002-8600-000
Date:
Quality:
Scanned document, all readable.
Upload date:
May 23, 2015
MD5:
154a1375-e4ea-7f9a-e2d5-989f9cd0d3ac
Downloads:
1