Decoding of Dolby Digital, Dolby Pro Logic and DTS (Digital Theater Systems) DTS is the latest and most widely used digital theater system for cinemas throughtout the world. The decoder has been incorporated into this receiver and is able to achieve high sound quality as well as produce dynamic surround sound effects. Also, there's no need to worry about program formats. When playing Dolby Digital, Dolby Pro Logic or Dolby Surround software in the (Dolby) Surround mode, decoding switches on automatically according to the input signal, all you have to do is enjoy! “DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc. Manufactured under licence from Digital Theater Systems, Inc. Manufactured under license from Dolby Laboratories. “Dolby”, “AC-3”, “Pro Logic”, and double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. © 1992 - 1997 Dolby Laboratories, Inc. All rights reserved. Direct Energy MOS amplifier This receiver incorporates 5 independent 100 watt power amplifiers, built with high-performance Hex power MOS FET output transistors. This construction provides improved linearity and accurate reproduction of each channel for true high fidelity reproduction from even the most demanding Dolby Digital and DTS program sources. Advanced Theater Modes This mode enhances the sound of either film or music so a more dramatic effect can be achieved. The four modes are each designed to accentuate specific sound qualities, giving the listener a wide range of possibilities. DSP Surround Modes DSP (Digital Signal Processing) surround mode gives you the capability of transforming your living room into six different sonic environments when listening to music. Midnight Listening Mode Midnight Listening mode allows you to obtain excellent surround sound effects even when listening at low volumes, something that was previously impossible. Digital Noise Reduction Digital Noise reduction is the latest technology for filtering out unwanted noise. It produces clear, resonant tones. Illuminated Remote Control of Other Components The supplied remote control can be used to operate a variety of other components simply by recalling the appropriate preset codes or by using the learning function to teach the remote control new commands. In addition, the multi-operation functions allow you to perform a variety of operations automatically. The Energy-saving Design This unit is designed to use minimal electricity when power is switched OFF (in Standby mode). Regarding the value of the power consumption in standby mode, refer to “Specifications” on page 82.